WORKERS
WORKERS Deluxe Pocket Tote Bag/ Dark Navy x Green Handle/Long
$117.00 (税抜)
CASDAY(東京/浅草・蔵前)のお取り扱い
Description
デラックストート、3回目。
今回の変更点は持ち手の取り付け幅と外ポケット。
オリジナルのデラックストートはMサイズ、Lサイズとあり、
持ち手の取り付けがMサイズは狭い(外ポケ無し)、Lサイズは広い(外ポケあり)と違いがあります。
今回、アレンジで、ボディはMサイズ、持ち手の取り付け位置と外ポケはオリジナルのLサイズの仕様。仕様を混ぜたということです。
それに伴い、ハンドルもショートとロング、二種類作りました。
もともとの取り付け幅が狭い状態だと、いくらハンドルを長くしても肩が入りにくい。
ハンドル取り付け幅が広がったことで、ロングも非常に使いやすいサイズ感になっています。
前回からの地味ですが変更点が一つ。
持ち手のテープがアクリルから綿スフ(綿レーヨン)の力織機テープ、今まで以上に分厚いものに変わりました。
おなじみ「探しに探す」で、産元さんを見つけました(なんと近所)
今まで、付属屋さんでわからなかった部分がスッキリわかりました。一口に「テープ」といっても、設備の違い、糸の違いでかなり風合いが変わる。
付属屋さんだと「同じ」範囲内でも、実は織機が違う。今回のテープ、過去一ごついです。
「綿・スフ」のスフは「ステープルファイバー」の略で、「スパン・レーヨン」とか、「短繊維のレーヨン」だそうです。
サイズは幅34/奥行16/高さ31。いわゆるMサイズ。持ち手はショートが30センチ、ロングが60センチ程。
ハンドルはテープの上に、底と同じ生地を縫い付けています。
ここも2本針のミシンで、生地の左右を折りながら、かつテープの真ん中に乗るように。
設備命!という事で、今回も北関東の工場さんまで行ってきました。
もちろん、日本製です。 三回行ったので、やっと社長は私の「顔」は覚えてくれました。多分、ブランド名はおぼろ気でしょう。
でも、生産管理のMさんはWORKERSのバッグ、買ってくれるぐらい気に入ってくれたので大丈夫です。
この「工場さんに覚えてもらえる」が意外と大事。
どうしても、仕様書で書ききれない、糸の目調子や、始末のきれいさ、ラフさ。
そういうのは、「こういう作りがあの人は好きだろうな」と判断してもらえないと、「これよ!!!」という上がりにはならないのです。
脇の部分、互い違いになるように生地端を折って縫う。
これが、バッグ本体の骨になり、中に何も入っていない状態でも自立します。 本体は4号帆布。
オンス換算、20.8オンス。 底と、テープに乗る部分は11号帆布。オンス換算、12オンス。
重さは600gほど。 今回のトートバッグ、本家と全く同じにしたいのではなく、「日本の規格で、本家に迫る、
場合によっては越えた部分もあるものを作りたい」のです。
ステッチのきれいさは完全に本家を越えていると思います。
さすが、日本の縫製工場。 生地の目も綺麗。テープはしなやかで持ちやすい。
ただ、本家は本家で、生地や部品の粗っぽさ、タフさ。縫製なんか「壊れなければ良い」というラフさ。
それはそれで、味わいです。 国が違えば、仕上がりも違う。その違いをぜひご覧ください。
ヴィンテージウェアに対しての圧倒的な探究心から生まれる本物のレプリカウェア
WORKERSは岡山を拠点にワーク、トラッド、ミリタリーを中心としたメンズウェアメーカー。
古着独特の雰囲気を好む代表の舘野高史氏は実際の古着を研究し、 その製品が作られていたメーカーや現存する建物にまで足を運び歴史や資料を 調べ上げて製品づくりのヒントにしています。
すべての製品がメイドインジャパンであり、自分で工程を理解し、 各工程ごとの専用の設備を要した工場でのみ生産を行っています。
日本からだけではなく、あのJ.CREWやINVENTORYなど 世界的に注目されている企業からも熱い注目を集めている。
ヴィンテージウェアに対しての圧倒的な探究心から生まれる本物のレプリカウェア
WORKERSは岡山を拠点にワーク、トラッド、ミリタリーを中心としたメンズウェアメーカー。
古着独特の雰囲気を好む代表の舘野高史氏は実際の古着を研究し、 その製品が作られていたメーカーや現存する建物にまで足を運び歴史や資料を 調べ上げて製品づくりのヒントにしています。
すべての製品がメイドインジャパンであり、自分で工程を理解し、 各工程ごとの専用の設備を要した工場でのみ生産を行っています。
日本からだけではなく、あのJ.CREWやINVENTORYなど 世界的に注目されている企業からも熱い注目を集めている。
Deluxe Tote, third time.
The changes this time are the handle mounting width and the outer pocket.
The original deluxe tote is available in M and L sizes,
The handle is narrower (no external pocket) for the M size and wider for the L size (with external pocket), which is different.
This time, with an arrangement, the body is M size, and the handle mounting position and outer pocket are the original L size. It means the specifications were mixed.
Along with that, we made two types of handlebars: short and long.
If the original mounting width is narrow, no matter how long the handle is, it is difficult for the shoulder to fit.
With the wider handle mounting width, the long size is now very easy to use.
It's a bit plain from last time, but there's one change.
The handle tape has changed from acrylic to cotton cloth (cotton rayon) power loom tape, thicker than ever before.
I found the local producer (surprisingly, it's nearby) through the familiar 'search to search'
I now have a clear understanding of parts I couldn't understand at the annex shop before. Even though we call it 'tape,' the texture changes significantly depending on the equipment and the different threads.
Even if the affiliate shop is within the "same" range, the looms are actually different. This tape is the best I've ever had.
The 'cotton sufu' abbreviation for 'staple fiber' is said to mean 'spun rayon' or 'short fiber rayon.'
Size is width 34 / depth 16 / height 31. The so-called M size. The handle is about 30 cm for short and 60 cm for long style.
The handle is sewn onto the tape with the same fabric as the bottom.
This is also a two-needle sewing machine, folding the fabric on both sides while placing it in the middle of the tape.
Equipment is a lifesaver! So, this time I went all the way to the factory in northern Kanto.
Of course, it's made in Japan. After three visits, the president finally remembered my "face." The brand name is probably a bit vague.
But Mr. M in production management liked the WORKERS bag so much that he bought it, so it's fine.
This "being remembered by the factory" is surprisingly important.
There are things that can't be fully covered in the specs—the stitching quality, the cleanliness of the finishing, and the roughness.
If you don't judge, 'This kind of design will probably suit that person,' you won't be able to get a '!! this is it.'
Fold and sew the edges of the fabric so that the sides are staggered.
This forms the main body of the bag, allowing it to stand up even when nothing is inside. The main body is made of No. 4 canvas.
Equivalent to 20.8 ounces per ounce. The bottom and the part where the tape rests are made of No. 11 canvas. Ounces equivalent: 12 ounces.
It weighs about 600g. This time, the tote bag isn't exactly the same as the original, but rather a 'Japanese standard, approaching the original'
Depending on the situation, I want to create something that even crosses the line."
I think the stitching quality completely surpasses the original.
As expected from a Japanese sewing factory. The fabric has beautiful textures. The tape is flexible and easy to hold.
However, the original is the original, and the fabric and parts are rough and tough. The sewing is so rough that 'as long as it doesn't break.'
That alone is a flavor. Different countries have different results. Please take a look at the differences.
Authentic replica wear born from an overwhelming curiosity about vintage wear
WORKERS is a menswear manufacturer based in Okayama, focusing on work, traditional style, and military styles.
Takashi Tateno, the representative who favors the unique atmosphere of vintage clothing, has studied actual vintage clothing, We visit the manufacturers where the products were made and the existing buildings to research history and materials to use them as inspiration for product creation.
All products are made in Japan, and you understand the process yourself, Production is carried out only in factories that require dedicated equipment for each process.
Not only from Japan, but also from places like J.CREW and INVENTORY, It is attracting intense attention from globally recognized companies.
Authentic replica wear born from an overwhelming curiosity about vintage wear
WORKERS is a menswear manufacturer based in Okayama, focusing on work, traditional style, and military styles.
Takashi Tateno, the representative who favors the unique atmosphere of vintage clothing, has studied actual vintage clothing, We visit the manufacturers where the products were made and the existing buildings to research history and materials to use them as inspiration for product creation.
All products are made in Japan, and you understand the process yourself, Production is carried out only in factories that require dedicated equipment for each process.
Not only from Japan, but also from places like J.CREW and INVENTORY, It is attracting intense attention from globally recognized companies.
- 品番
- -
- 素材
- Cotton
- 原産国
- JAPAN













































































