WORKERS / Summer Trousers, 20 Charcoal Linen Cotton

WORKERS Officer Trousers, Regular Fit, Type 2 Serge are now in stock. About 21cm. Regular Fit, not too wide, not too narrow. I realized I'd never made "regular chinos" with this silhouette and narrow welts, so I decided to give it a try. The sides are double-stitched and the front pockets are angled for easy access. The 24 Autumn/Winter collection had a similar fit, but while the obi was attached separately like jeans, this time it was called a "body obi" or "lower waist obi," and the obi is attached directly to the body. These are the so-called chinos. These are also now easily sewn, but there are some points to make the pattern easier to sew, and if the waist belt is tight, it becomes difficult to sew the back! Naturally, I made some ingenious efforts, and even told the factory, "Don't erase this line! If you do, when we attach the lining at the waist in the next process, the bottom part won't measure enough and we'll end up with a tuck!" I don't know how many times I went to the factory, but thanks to that, I can now sew it perfectly. The part where the side seam intersects with the pocket is also difficult. If you look closely at old clothes, you will often see that the edges of the fabric are not sewn in properly or that there are punctures. So, you can "cut off the fabric that goes inside and is not visible," "adjust the angle of the pocket so that it fits well," "press the seam allowance as close as possible," etc. The buttonhole area of ​​vintage items is also too thick, so "we remove the fabric inside," "if we just remove it, the edge of the fabric will move around next to the hole, so we add a hidden stitch that does not penetrate the outside," etc. When I think back on it, I think, "They really came up with a lot of different ideas." I'm grateful to the factories that worked with us. (It's a shame for the factories that dropped out along the way.) 32 Waist 42cm (laid flat) Front rise 32cm Thigh 33cm Hem width 21cm Inseam 77cm 34 Waist 45cm (laid flat) Front rise 33cm Thigh 34cm Hem width 22cm Inseam 78cm Authentic replica wear born from an overwhelming desire to explore vintage wear WORKERS is a men's wear manufacturer based in Okayama that specializes in workwear, traditional styles, and military wear. The company's president, Takashi Tateno, who likes the unique atmosphere of vintage clothing, has studied actual vintage clothing, We visit the manufacturers that made the products and the existing buildings to learn about their history and materials. We research these and use them as inspiration for our products. All products are made in Japan, and we understand the process ourselves. We only produce our products in factories that have dedicated equipment for each process. Not only from Japan, but also from J.CREW and INVENTORY It is also attracting keen attention from companies with global recognition.